Monthly Archive for July, 2017

RetroUSB Wireless Gamepad for NES and AVS Consoles

I’ve committed another video review — this time for a new wireless controller just released by RetroUSB.IMG_20170720_185051205

Designed by Brian “Bunnyboy” Parker, who also designed the RetroUSB AVS, a console that clones Nintendo Entertainment System hardware via a field programmable gate array (FPGA) for maximum accuracy and authenticity, the RetroUSB Wireless Gamepad (RET-GP) controller has been in the works for a while. It was worth the wait. Some of its highlights:

  • Retails for $65, available now for immediate shipping at www.retrousb.com
  • Wireless over RF, rather than Bluetooth, for minimum input lag
  • Microswitch/tactile buttons vs. traditional rubber membranes in OEM controllers
  • Rechargeable battery that lasts 100 hours
  • Instant on — no need to sync with the wireless receiver
  • Receivers can be assigned to up to four controllers for simultaneous play

I go into a lot of detail and test the controller out in my video review. Check it out if you’re wondering how those buttons sound!

IMG_20170720_185106572In the video, I noted that the casing was slightly separated below the lefthand grip. After I opened it up (see the teardown pics below) and reassembled it, the separation was less noticeable. It seems this isn’t a common occurrence, but it doesn’t bother me too much now.

Some other observations about the controller that didn’t make it into the video:

  • Although I never noticed lag using the 8Bitdo NES30 on my RetroN 5, when I used the RET-GP on the RetroN 5, I suddenly noticed a lack of lag. In other words, it seems ever so slightly more responsive than the NES30; the start of 2-1 in Ninja Gaiden III was a bit easier than it usually is. I’ll have to test more with this controller on my HDTV and a CRT, and I may do record a short video comparing its response times with the NES3o.
  • When using the turbo buttons, the red LED flashes to show you what speed setting you’re on. I’m just so impressed with the whole implementation of turbo on this controller, even if I rarely, if ever, use it.
  • When recharging the controller, you have to press a button to turn it on while it’s plugged in. The red LED will flash slowly to show that it’s recharging, and will glow steady when it is fully charged. I don’t know if it will charge while off, but I assume it will.
  • There’s no manual on/off switch for the controller. As soon as you press a button, it’s on — pretty much instantaneously. It powers off if it doesn’t receive any inputs for a while. I actually found this was really nice because I didn’t have to hold down a button combination for a few seconds like I do with the NES30 on my RetroN 5 (for Bluetooth pairing). I sometimes have trouble pairing the NES30 to the receiver on my NES Classic, and I wonder if people with NES30 receivers on their original console have the same problem. I’m considering getting an adapter to use original controllers on the NES Classic, so I can test whether the RET-GP works with it too.

Apparently you can transplant the guts of the RET-GP into an original NES controller, after modifying the shell. I don’t think I’ll bother with that, because I like the retro design and form factor of the RET-GP more, but here’s what’s inside for the curious:

IMG_20170720_185230131

IMG_20170720_185245010

IMG_20170720_185252130

IMG_20170720_185259714

So what do you think? Will you pick one of these up?

Share

Hyperkin Cadet NES Controller Video Review and Teardown

I’ve branched out a little from my weekly NES live streams and posted my first product review for the Hyperkin Cadet controller for the Nintendo Entertainment System and NES Classic Edition. (They also have USB versions, which I failed to mention in the video.)

I mainly did this because although I’d heard great things about the controller from many reviewers (and only one exception), I didn’t see anyone actually test one out for the things that usually are terrible in third-party NES controllers, particularly the D-pad, which often triggers diagonals accidentally. So I decided I needed to try it for myself. I’ve also been interested in what it looks like inside, since most knockoffs are pretty cheap, but I was pleasantly surprised. This controller looks very well made, with an actual chip like the original NES controller, rather than your typical “globtop”:

No black glob here! Just a real chip and a pretty clean looking PCB.

No black glob here! Just a real chip and a pretty clean looking PCB.

Here's the back. Not much to see here.

Here’s the back. Not much to see here.

The rubber membranes seem very similar to replacement parts for NES controllers.

The rubber membranes seem very similar to replacement parts for NES controllers.

Unfortunately, there's a screw hidden under that Hyperkin label.

Unfortunately, there’s a screw hidden under that Hyperkin label.

I doubt I’ll do too many of these, but I’m very interested in, and picky about, controllers and I thought these details might be helpful to anyone else who is curious or on the fence about these controllers. I’m already planning to review the just released RetroUSB wireless controller as well, which is about six times more expensive than this one.

Share